HIGH SPEED DATA LOGGERS
DEBUG YOUR PLANT
HIGH SPEED DATA LOGGERS
DEBUG YOUR PLANT
| Input Channels | Precision | |
| Analog Channel Types | Powered +/-10 V | < 1% FS |
| +/-100 V | < 1% FS | |
| 700 VAC | < 1% FS | |
| Powered 0-20 mA | < 1% FS | |
| Thermocouple (any type) | < 1% of thermocouple voltage | |
| RTD | < 1% FS | |
| Accelerometer (IEPE) | < 1% FS, dyn. | |
| Tensometer bridge | < 1% FS | |
| Digital Channel Types | Powered PFC with 24 VDC logic | |
| Special Channel Types | Camera with GigE interface (may use decimated frame rate) Audio input (min. sample rate 8 kHz) |
|
| Isolation | Up to ch-ch 1500 Vrms depending on channel type | |
| Protection | Lightning surge protection (optional) Ex protection (optional) |
|
| Terminations | Screw terminals with knives, or plugs | |
| Channel Grouping | Typically 16 channels of the same analog input type Typically 32 channels of the same digital input type |
|
| Input Channel Count | Typically 320 channels per rack | |
| Data Acquisition | |
| Sampling Frequency | 100 Hz to 10 kHz per channel, all channels are sampled with the same sampling frequency (except for Camera and Audio channels) |
| Sampling Timebase | synchronized to NTP or GPS clock |
| Storage | |
| Hardware | Built-in RAID1 data server designed to hold weeks or months of data |
| Continuous Data | Uninterrupted storage, old data automatically overwritten |
| Events | Each event stored with pre- and post-trigger continuous data |
| Recovery | Configurations and disk images saved on RAID1 data server for fast recovery in case of data acquisition controller hard drive failure |
| Communications | |
| LAN1 | Connects to company network |
| LAN2 | Connects to remote operator console (fiber optic optional) |
| Industrial Communications | MODBUS protocol to connect to SCADA using any common industrial interface (RS485, CAN, Hart, …) |
| Operator Controls | |
| Engineering Console | 19” LCD flat-panel with touch screen, keyboard, mouse |
| Operator Console | 24” LCD, keyboard, mouse |
| Physical | |
| Form Factor | Industrial cabinet with 19” rack or mounting plate for DIN rail components. Typical cabinet dimensions 800x800x2160 mm (WxDxH). Number of cabinets depends on channel count |
| Weight | Typically 300 kg per cabinet |
| Protection Class | Standard IP54 |
| Environment | |
| Operating Temperature | 10..40 °C |
| Relative Humidity | 0 to 90% RH non-condensing |
